Korea University


QS Subject Rankings 26 areas Entered the top 100

QS World University  Rankings 2023 74th


now page


게시판 -- 목록(갤러리)
Development of Binder-Free Textile Type Supercapacitor Electrode
  • 글쓴이 : Communication Team
  • 조회 : 98
  • 일 자 : 2024-05-20

Development of Binder-Free Textile Type Supercapacitor Electrode
through Carbon Nano-Oligomer-Based Interfacial Bonding
Professor Cho Jin-han’s group published their results in Energy Storage Materials



(왼쪽에서) 안정연 석박사통합과정 (제1저자/고려대), 장우제 석박사통합과정 (제1저자/고려대), 송용권 박사 (제1저자/Northwestern university), 조진한 교수 (교신저자/고려대), 고용민 박사 (교신저자/DGIST)

▲ (From left) Ahn Jeong-yeon (student in integrated master-doctoral degree programs, first author), Chang Woo-jae (student in integrated master-doctoral degree programs, first author), 

Dr. Song Yong-kwon (first author/Northwestern university), Professor Cho Jin-han (corresponding author), and Dr. Ko Yong-min (corresponding author).



Professor Cho Jin-han’s group from the Department of Chemical and Biological Engineering and KU-KIST Graduate School of Converging Science and Technology and Dr. Ko Yong-min’s group from Daegu Gyeongbuk Institute of Science and Technology developed a nanoparticle-based binder-free textile type supercapacitor electrode using a carbon nano-oligomer, surfaced-modified with a hydrophilic functional group.

Their results were published online in Energy Storage Materials (IF = 20.4), a renowned international journal in materials science and nanotechnology, on April 12.

- Title of article : Binder-free, multidentate bonding-induced carbon nano-oligomer assembly for boosting charge transfer and capacitance of energy nanoparticle-based textile pseudocapacitors
- Article URL : https://www.sciencedirect.com/science/article/pii/S240582972400223X

Supercapacitors store electric charges based on reactions that rapidly occur on the surface of an electrode. Therefore, when an electrode material is produced in the form of nanoparticles with a high specific surface area, the active area can be increased, thereby improving the charge transfer efficiency. In order to effectively utilize the advantages of these nanoparticles, it is important that they are uniformly distributed within an electrode through stable combination with other supporting components such as the conductive fillers or binders required for manufacturing an electrode.

However, the slurry coating method, a common method of manufacturing electrodes, has limitations when applied to nanoparticle-based electrodes. First, in order to realize high energy density, the ratio of the supporting components to active materials needs be minimized. However, since nanoparticles have a high specific surface area, the ratio of the supporting components required for slurry production must be increased. In addition, the ligand present on the surface of the nanoparticles is an insulating organic material that acts as resistance within an electrode. Furthermore, slurries based on physical mixing are prepared without considering the bond between nanoparticles and conductive additives, so it is difficult to induce uniform distribution within an electrode.
*Ligand: Molecules or ions that form a coordinate bond with a central atom of a complex compound, such as nanoparticles, and which surround the central atom.

In charge transfer, the wettability between an electrode and an electrolyte is also a factor to be considered. In most supercapacitors that use an aqueous electrolyte solution, conductive additives (carbon nanotubes, carbon black) or binders (poly(vinylidene fluoride)), which are non-polar materials, form a thick diffusion layer on the interface between an electrode and an electrolyte, thereby hindering charge transfer. In particular, carbon nanotubes or carbon black have poor dispersibility and are prone to agglomeration, which can induce uneven charge distribution within the electrode.

Accordingly, the research team prepared carbon nano-oligomers in functional groups through chemical treatment of carbon black, a conductive additive, and manufactured an electrode that ensures an established uniform charge transfer path even without a binder, through an assembly technology based on interfacial bonding with active material nanoparticles.

The carbon nano oligomers have functional groups that can directly and strongly bind to the surface of active material nanoparticles without the assistance of a binder, so they were able to serve as both a conductive additive and a binder within the electrode. In particular, it was possible to completely remove insulating organic substances in the electrode through an assembly based on a ligand substitution reaction in which the ligand on the surface of the nanoparticles is detached and a carbon nano oligomer is combined with the nanoparticles at that site.

The researchers applied the nanoparticles to a 3D textile type conductor to drastically increase the loading amounts of an active material compared to a flat plate, and to maintain smooth charge transfer even at high loading amounts. The electrode provided an excellent and stable areal capacitance of 1,725 mFcm-2.

The study was supported by the National Research Foundation of Korea, funded by the Ministry of Science and ICT, and the KU-KIST Graduate School of Converging Science and Technology Program.



<Figure 1>

[Figure  설명] 어셈블리 과정 및 직물형 전극 제작 방법 모식도

[Image description] A schematic diagram showing the assembly process and the method of manufacturing the textile type electrode.

An electrode is manufactured using an assembly based on interfacial bonding between manganese oxide nanoparticles, an active material, and carbon nano oligomers. The nanoparticles are applied to a textile type current collector in order to manufacture a textile type supercapacitor electrode that allows for rapid charge transfer.

Research 게시판 리스트